Extron electronic 7200, 3200 manual Command and Response Table for SIS Commands, Symbol Definitions

Command and Response Table for SIS Commands

Symbol Definitions

]	=	CR/LF (carriage return/line feed) (hex 0D 0A)
}	=	Carriage return (no line feed, hex 0D)
	=	Pipe (can be used interchangeably with the } character)
•	= Space character
E	= Escape key (hex 1B)
W	=	Can be used interchangeably with the E character
X!	=	Input number (for tie)	00	– 32	(FOX Matrix 3200) or 72 (FOX Matrix 7200) (00 = untied)
X@	= Output number		01	– 32	(FOX Matrix 3200) or 72 (FOX Matrix 7200)
X#	= Mute		0 = not muted				1 = muted
X$	=	SFP or reclockable output number	00 – 32 or 72 (00 = global [SFP only])
X%	=	Output reclocking rate	00	= auto (default)			01 = bypass
X^	=	Laser control	0 = disable			1 = enable	2 = automatic
X&	=	Global preset #	00	– 32	(3200) or 72 (7200) (00 = current configuration for view only)
X*	= Room number (for room presets)		01	– 10 maximum (each can have up to 10 presets (X1)) assigned)

NOTE: A Room is a subset of operator-selected outputs that relate to each other. The FOX matrix switcher supports up to 10 rooms, each of which can consist of 1 to 16 outputs.

X(		= Name	Up to 12 characters for input and output names and global and room preset names
			Upper- and lower-case alphanumeric characters and _ / and spaces are valid.
	NOTE: The following characters are invalid or not recommended in the name: ~ , @ = ‘ [ ] { } < > ’ “ ; : \ and ?.
X1)		= Room preset number	01 – 10 maximum

NOTE: A Room preset is a stored configuration with all outputs in a single room. A retrieved room preset becomes the current configuration.

X1! = Connection status			0	= no input connected	1 = input connected
X1@ =		Group number (for I/O grouping)	1	(group 1) through 4 (group 4) (or 0 = no group)
X1# =		Input number (for other than tie)	01 – 32 (FOX Matrix 3200) or 72 (FOX Matrix 7200)
X1$ = Lock mode status			0	= unlocked	1 = locked
X1%	=	Number (quantity) of inputs	8, 16, 24, 32, 40, 48, 56, 64, or 72
X1^ =		Number (quantity) of outputs	8, 16, 24, 32, 40, 48, 56, 64, or 72
X1& =		Board installed	0 = No board installed		4 = Non-pathological multimode board
			1 = Non-reclocking multimode board*		5 = Non-pathological singlemode board
			2 = Non-reclocking singlemode board*		6 = Pathological singlemode board
			3 = 3G, SDI, HD-SDI board		x = Unknown board or mix of transceivers
X1*	= I/O board slot number		1	– 9 (FOX Matrix 7200) or 1 – 4 (FOX Matrix 3200)
X1( =		Transceiver module installed	0 = No module installed
			1	= Non-pathological multimode module	3 = 3G-SDI, HD-SDI, SD-SDI module
			2	= Non-pathological singlemode module	4 = Pathological singlemode module
X2)	=	Transceiver module number	01 – 72 (or maximum number of transceiver modules for your configuration)
X2! = Vendor/manufacturer name
X2@ =		Transmit output power in milliwatts
X2# =		Receive optical power in milliwatts
X2$ = SFP temperature			Degrees Celsius
X2% =		Firmware version number to second decimal place (x.xx)
X2^ =		Verbose firmware version-description-upload date/time. See the Query controller firmware version (verbose) command onpage 65.
X2& =		Voltage	Positive or negative voltage and magnitude
X2* = Temperature			Degrees Fahrenheit
X2( =		Fan speed	In revolutions per minute (RPM)
* Legacy board, no longer manufactured, identified for			completeness only

FOX Matrix 3200 and 7200 Switchers • Programming Guide 58