List of Replaceable Parts | 7 |
INTRODUCTION |
7-1. INTRODUCTION
This section contains an illustrated list of replaceable parts for the 8842A. Parts are listed by assembly; alphabetized by reference designator. Each assembly is accompanied by an illustration showing the location of each part and its reference designator. The parts lists give the following information:
∙Reference designator
∙An indication if the part is subject to damage by static discharge
∙Description
∙Fluke stock number
∙Manufacturers supply code
∙Manufacturers part number or generic type
∙Total quantity
∙Any special notes (i.e.,
CAUTION
A * symbol indicates a device that may be damaged by static discharge.
7-2. HOW TO OBTAIN PARTS
Electrical components may be ordered directly from the manufacturer by using the manufacturers part number, or from the Fluke Corporation and its authorized representatives by using the part number under the heading FLUKE STOCK NO. In the U.S., order directly from the Fluke Parts Dept. by calling
In the event that the part ordered has been replaced by a new or improved part, the replacement will be accompanied by an explanatory note and installation instructions, if necessary.
To ensure prompt delivery of the correct part, include the following information when you place an order:
∙Instrument model and serial number
∙Part number and revision level of the pca containing the part
∙Reference designator
∙Fluke stock number
∙Description (as given under the DESCRIPTION heading)
∙Quantity
7-3. MANUAL STATUS INFORMATION
The Manual Status Information table that precedes the parts list defines the assembly revision levels that are documented in the manual. Revision levels are printed on the component side of each pca.
