Fluke 8842a instruction manual General, Power

	Introduction and Specifications
	SPECIFICATIONS	1
GENERAL
COMMON MODE VOLTAGE	1000V dc or peak ac, or 700V rms ac from any input to earth.
TEMPREATURE RANGE	0 to 50°C operating, -40 to 70°C storage.
HUMIDITY RANGE	80% RH from 0 to 35°C, 70% to 50°C.
WARMUP TIME	1 hour to rated specifications.
POWER	100, 120, 220, or 240V ac ±10% (250V ac maximum), switch
	selectable at rear panel. 50, 60, or 400 Hz, automatically
	sensed at power-up. 20 VA maximum.
VIBRATION	Meets requirements of MIL-T- 28800C for Type III, Class 3,
	Style E equipment.
PROTECTION	ANSI C39.5 AND IEC 348, Class I.
SIZE	8.9 cm high, 21.6 cm wide, 37.1 cm deep(3.47 in high, 8.5 in
	wide, 14.6 in deep).
WEIGHT	Net, 3.4 kg (7.5 lb); shipping, 5.0 kg (11 lb).
INCLUDED	Line cord, test leads, Instruction/Service Manual, IEEE-488
	Quick Reference Guide, (Option –05 only), and instrument
	performance record.
IEEE-488 INTERFACE FUNTION	Option allows complete control and data output capability, and
	supports the following interface funtion subsets: SH1,AH1, T5,
	L4, SR1, RL1, DC1, DT1, E1, PP0, AND C0.

ELECTROMAGNETIC COMPATIBILITYSpecifications apply when used in an environment with fields strengths ≤ 1 V/m, (0.8 V/m for DC Current.) For fields strengths up to 3 V/m, multiply floor adder by 12 for VDC and Resistance and 200 for DC current. VAC and AC Current have no adders up to 3 V/m.

f1-01.wmf

Figure 1-1. External Dimensions

1-11