1The CONTROL command can be issued more than once.

2The document size of *2 becomes the same as that reported by *1.

3No CONTROL command must be issued between a READ command for the front-side and a START command for the back-side. Any CONTROL command issued during this period is invalid. If a CONTROL command must be issued, terminate the scanning sequence once by issuing a CLEAR command. Issuing the CLEAR command cause the document to be ejected.

4The IMAGE MODE SENSE command need not always be issued.

Figure 3.7 Command/response sequences for the read operation (1)

3-86

M3099EX/EH OEM Manual