A3.2 Print head position adjustment
You can adjust the print position in mainscanning direction manually. The position you can set is limited as stated in section 1.
Endorser cover
or
Tab
1Open and remove the endorser cover at the rear top corner of the scanner. Power of the scanner will turn off, if the power is on at the cover open.
2Pinch the tab near the print head and slide it to the position you want to print. The print position is indicated by the indicater behind the tab and the label attached on the rear cover.
3Close the endorser cover.
You can test the printing by the procedure in section A2.6.
M3099EX/EH OEM Manual |