Guide plate

Hopper table

Guide

Separation pressure adjustment lever

Double feed

Slip feed

5Lift the document sensor unit and keep it at the upper position with one hand and pull the roller ASY out with the other hand.

6Move the guide on the hopper table completely to the end.

7Hold both ends of the guide plate and press them down to remove the guide.

8Adjust the separation pressure by using the separa- tion pressure adjustment lever according to paper feed error as follows:

• Slip feed:

Turn clockwise by 45°. (In- crease the separation pressure.)

• Double feed:

Turn counter-clockwise by 45°. (Decrease the separation pres- sure.)

Notice:

If the paper feed error reccur, try this adjustment again until the lever stops.

C-2

M3099EX/EH OEM Manual