Fujitsu M3099EX/EH IMAGE CONTROL command

IMAGE CONTROL command

This command sets the scanner to the operation mode of the image processing circuit.

Byte 1		Byte 2	Byte 3			Byte 4
CNT		CMD	TEXT			or later
X'0X'		X'5A'	Image control			Image control
			register start number			register
	b7			b0
(Byte 3)
	0
					Image control register No.
					Front-side/back-side select

b6Description

0Selects image control register A (front-side)

1Selects image control register B (back-side)

Note: If this command is sent to the scanner without image processing option (IPC II), the scanner sends "Operation error" as response.

3-38 M3099EX/EH OEM Manual