A2.5 How to reset the print head life counter

You must reset the print head life counter, when you replace the print head.

<< SETUP MODE >>

INK RESET

Screen 12

INK RESET

No-Mode 1

Yes-Mode 2

Screen 13

13 At Screen 1 press [Mode 1] eleven times to go to INK RESET screen. (Screen 12)

14 Press [Mode 2] to see Screen 13.

If you want to reset the counter, press [Mode 2]. And you can see Screen 14 for 3 sec.

If you don’t want it, press [Mode 1] to go to Screen 12.

If you want to close the job, go to 7 .

RESET Finish !!

Screen 14

A2.6 How to test the printing by the operator panel operation

You can check the print result by the following procedures.

<<CE MODE >>

TEST××: START

Screen 15

15 Set the endorser ON by the procedure of the section A2.1.

16 While pressing the [Mode 2], turn the power of the scanner on. Then the LCD displays the MAINTENANCE MODE initial screen.

(Screen 15)

17 Press [Mode 2] once and press [Mode 1] once. Place the document on the stacker. Then press [START].

NOTICE: The scanner prints the five digit numbers from the initial number by the increment of one.

NOTICE: Before pressing [START], you can set document size, resolution and so on. (See OPERATOR’S GUIDE)

A-4

M3099EX/EH OEM Manual