Cleaning the rollers
Cleaning the rollers with Cleaning Sheet:
1 Set the hopper table guides to the B4 width.
Guide
Hopper table
Lock
“B4”lever
Hopper table
Right guide
Left guide
FRONT
2Remove protective paper from the cleaning sheet. With the adhesive side up, place the cleaning sheet on the hopper table by aligning it with the left guide.
3Press [MODE2] twice, [MODE1] once, then [START]. (The hopper table goes up and the cleaning sheet is transported.)
4By aligning with the right
guide, place the same | CLEANING |
cleaning sheet on the |
|
hopper table with the |
|
| |
adhesive side up. |
|
5Transport the cleaning sheet by the switch operations of 3.
6Place a new cleaning sheet on the hopper table with the adhesive side down, and repeat steps 2 to 5.
M3099EX/EH OEM Manual |