Mode

Details

 

 

ON/OFF

“OFF” is default setting.

 

 

1

“1” is default setting.

 

This mode is used when the batch of paper which length are same

 

are scanned.

 

When the paper which tears and wrincled are scanned, Scanner

 

may mistake it also.

 

 

2

This mode is used when the batch of paper which length and

 

thickness are same are scanned.

 

However, when the thin papers are scanned, Scanner may mistake

 

to detect the Double-feed rarely.

 

In case of this, please test to scan the thin papers in advance.

 

 

B3.2 Setting IPC-2 pre-set mode

When you set the using of IPC-2 pre-set mode, you must set as follows.

<< SETUP MODE >>

IPC-2 SET

Screen 7

IPC-2 SET

No

 

Screen 8

 

 

 

IPC-2 SET

 

 

 

 

 

X

 

 

 

 

Screen 9

 

Panel/Host Set Ignore

No-Model

 

Yes-Mode 2

 

 

 

Screen 10

 

 

 

Host Set Ignore

No-Model

 

Yes-Mode 2

 

 

 

Screen 11

10At Screen 2, press [Mode 1] twice to go to the IPC-2 SET screen. (Screen 7)

11Press [Mode 2] to see Screen 8 or 9. If “No” is displayed, IPC-2 pre-set mode is not used. If pattern number (“1”-”5") is displayed, IPC-2 pre-set mode is used. “No” or number status flips each time you press [Mode 1]. (The default setting is “No”.)

12If you press the [Mode 2] at Screen 8, you return to Screen 7. The setting is stored to EEPROM. If you press the [Mode 2] at Screen 9, you go to Screen 10.

13If you press the [Mode 1] at Screen 10, IPC- 2 pre-set mode can be not used. Also the setting is changed to “No” obligatory and stored to EEPROM. If you press the [Mode 2] at Screen 10, IPC-2 pre-set mode can be used and the setting number is stored to

EEPROM.

When you close the setup mode, go to 9 .

B-4

M3099EX/EH OEM Manual