B3.8 Setting initial value of endorser

When you set the using of endorser and the initial number, you must see Section A2.1 and A2.2 of Appendix A. The details are as follows.

• The using of Endorser (ON/OFF)

The default setting is “OFF” (Endorser is not used.)

• The initial number

The default setting is “00000”. The specifiable range is from 00000 to 65535.

NOTICE: If the specified value exceeds acceptable range, returning to SETUP menu is failed.

<Method of Increment>

In case of the initial value is “00001”.

 

→ 0 0 0 0 1

(1 page)

 

 

0 0 0 0 2

(2 pages)

 

:

:

 

↓

↓

 

6 5 5 3 4

(65534 pages)

 

6 5 5 3 5

(65545 pages)

 

 

 

 

NOTICE: When it is not set “depending on operator panel” by host, no blinking. (You can not change the setting.)

When the setting is set “ON” depending on operator panel the direction of printing is 20 mm from read reference position.

B3.9 Setting reset method of endorser

When you set the reset method of endorser, you must see Section A2.3 of Appendix A.

The default setting is “ON” (The print number will be reset when HOPPER EMPTY is detected.).

SETUP MODE

M3099EX/EH OEM Manual

B-9