B3.4 Setting buzzer

When you set the using of buzzer, you must set as follows.

<< SETUP MODE >>

BUZZER SET

Screen 15

BUZZER SET

ON

Screen 16

17 At Screen 2, press [Mode 1] four times to go to the BUZZER SET screen. (Screen 15)

18 Press [Mode 2] to see Screen 16. If “ON” is displayed, the buzzer will ring when the error is occured. If “OFF” is displayed, it wouldn’t. The “ON” or “OFF” status flips each time you press [Mode 1]. The status will be set in EEPROM automatically.

19 If you want to return to Screen 15, press [Mode 2]. When yo close the setup mode, go to 9 .

B3.5 Setting pre-pick

When you set the using pre-pick, you must set as follows.

<< SETUP MODE >>

PREPICK SET

Screen 17

PREPICK SET

ON

Screen 18

20 At Screen 2, press [Mode 1] five times to go to the PREPICK SET screen. (Screen 17)

21 Press [Mode 2] to see Screen 18. If “ON” is displayed, the pre-picking will be done when the document is fed. If “OFF” is displayed, it

wouldn’t. The “ON” or “OFF” status flips SETUP MODE each time you press [Mode 1]. The status will

be set in EEPROM automatically.

22 If you want to return to Screen 17, press [Mode 2]. When you close the setup mode, go to 9 .

M3099EX/EH OEM Manual

B-7