Cleaning the rollers with dry cloth and alcohol (Cleaner F1)

This roller exists only 1000 sheets hopper type.

Upper transport unit

Pick rollers

Belt Lower transport unit

1Open the upper transport unit. (See page 4-2)

2Wipe the pick rollers, belt and the upper and lower transport unit rollers with a dry cloth or cloth soaked in isopropyl alcohol.

3Close the upper transport unit. (See page 4-2)

Cleaning the steel rollers with cleaner F2

This cleaning is required when the toner stick to the roller.

1

Open the upper transport

Feed roller

unit. (See page 4-2)

 

2

Apply a small amount of

 

cleaner F2 to a Q-Tips.

 

While turning the roller

slowly, wipe its surface with Q-Tips.

Cleaning the transport paths

Clean the transport paths as follows

This roller exists only 1000 sheets hopper type.

Transport paths

1Open the upper transport unit. (See page 4-2)

2Wipe the transport paths with a dry cloth or cloth soaked in isopropyl alcohol. Use a vacuum cleaner when removing paper dust from the paths.

3Close the upper transport unit. (See page 4-2)

8-6

M3099EX/EH OEM Manual