Fujitsu M3099EX/EH SEND DATA command

Note: For overlay pattern matrix data, X'FF' or X'00' must be set.

X’FF’: Force the corresponding pixel to be white.

X’00': Binarizes the corresponding pixel based on the specified slice (density). For a floating slice, it is binarized based on the normal density.

[Example]

	00	00		00	00		FF	FF		FF	FF
	00	00		00	00		FF	FF		FF	FF
	00	00		00	00		FF	FF		FF	FF
~			~			~			~		~
	00	00		00	00		FF	FF		FF	FF
	00	00		00	00		FF	FF		FF	FF
	00	00		00	00		FF	FF		FF	FF

(8 × 8 matrix)

SEND DATA command

Transfers print pattern and data items.

Byte 1	Byte 2	Byte 3	Byte 4
CNT	CMD	TEXT	or later
X'XX'	X'48'	Print information III (*1)	Print (data )

*1: For this scanner, set X'00".

3-58 M3099EX/EH OEM Manual