[Start]/[Stop] button

Reading is started or stopped using the Start and Stop buttons as follows:

[Start] button

Read operation can be started in either manual or automatic start mode. To start reading in manual start mode, press this button while the ready indicator is lit. (*1)

*1: Make sure that the LCD is initial screen of simplex or duplex reading mode. If not press Stop button once, then press Start button.

Manual start mode:

Reading is started by the Start button.

Automatic start mode: Reading is started by a command from the host machine.

[Stop] button

This button is effective regardless of whether the scanner is in manual or automatic mode. Press this button to stop the read operation.

During reading: Reading immediately stops and the document being fed are ejected to the stacker.

The hopper table is lowered to the bottom.

Before reading: A prepicked document if any is ejected to the stacker. The button works only when a document is picked.

The hopper table is lowered to he bottom.

Note: If a document which is not picked remain in front of ADF. Please set the document on the hopper again.

4-22

M3099EX/EH OEM Manual