48 At Screen 30, press [Mode 1] until the digit you want to change blinks. Then press [Mode 2] until the digit changes as you want. (The specifiable range is from 1 to 1999 sec. in 1 sec. step.)

49 Press [Mode 1] and [Mode 2] at a time to see Screen 29. The settings are stored to

EEPROM.

50 When you close the setup mode, go to 9 .

B3.16 Setting hopper time

When you set the hopper time, you must set as follows.

<< SETUP MODE >>

HOPPER TIMER

Screen 31

HOPPER TIMER

X X S

Screen 32

51 At Screen 2, press [Mode 1] sixteen times to go to the HOPPER TIMER screen. (Screen 31)

52 Press [Mode 2] to see Screen 32. (The default setting is 7 sec.)

53 At Screen 32, press [Mode 1] until the digit you want to change blinks. Then press [Mode 2] until the digit changes as you want. (The specifiable range is from 0 to 30 sec. in 1 sec. step.)

54 Press [Mode 1] and [Mode 2] at a time to see Screen 31. The settings are stored to

EEPROM.

55 When you close the setup mode, go to 9 .

B-12

M3099EX/EH OEM Manual