A3. Print head A3.1 Replacing the print head handling
When “INK EMPTY” is displayed in LCD display, the operator is responsible to change the print head as follows.
Endorser cover
| or | |
Print head | Print head | |
lock lever | ||
|
1Open and remove the endorser cover at the rear top corner of the scanner. Power of the scanner will turn off, if the power is on at cover open.
2Turn the print head lock lever up, then replace the print head.
3Attach the new print head in the endorser and turn the print head lock lever back.
4Close the endorser cover back.
5Reset the print head life counter by the
procedure stated in section A2.5. (See
NOTICE)
ENDORSER
You can test the printing by the procedure in section A2.6
NOTICE: The reset of the print head life counter is important to correctly
detect the life of the new print head.
M3099EX/EH OEM Manual |