Fujitsu M3099EX/EH Device and Operator Actions for Equipment Errors

Device and Operator Actions for Equipment Errors

Table 5.1 Device and operator actions for temporary errors (continued)

LCD display	Scanner actions	Action to recover
PRINT	- Print head is not set.	- Press “STOP” to reset
HEAD	- “Temporary Error” is returned	the error and set the
NOT SET	to the host computer and an	print head again.
	error message is displayed on
	the LCD display.
PRINT	- Print head is not set correctly	- Press “STOP” to reset
HEAD	or does not work well.	the error and set the
ALARM	- “Temporary Error” is	print head again.
	returned to the host compu-	- If the error message is
	ter and an error message is	displayed on the LCD
	displayed on the LCD	display again, change
	display.	the print head.

Table 5.2 lists the scanner and operator actions for equipment errors.

Table 5.2 Device and operator actions for equipment errors

LCD display	Scanner actions	Action to recover
HOPPER	- The Check lamp lights and an	- Check if the
ALARM	error message is displayed on	lamp or heater is
	the LCD display.	attached
	- The mechanism system is	correctly.
	stopped.	Replace lamp
		according to the
TRANS-	- The Check lamp lights and an
		replacement
PORT	error message is displayed on
		method.
ALARM	the LCD display.
		- If turning the
	- The mechanism system is
		power on again
	stopped.
		does not recover
		the scanner,
		contact the
		maintenance
		personal.

5-4 M3099EX/EH OEM Manual