Pick Roller Replacement

Replace the pick roller as follows:

Upper transport unit

Operator panel

1Turn off the power switch.

2Open the upper transport unit. (See page 4-2)

Lever

BASIC

OPERATION

Power switch

Pick roller

Pick roller

U shaped clip

 

section

 

3Put off U shaped clips on both ends of the pick roller shaft. Pull the pick rollers outward each other to remove.

4Install a new pick rollers and put the U shaped clips on the pick roller shaft.

5Close the upper transport unit. (See page 4-2)

NOTICE

When you install pick rollers, make sure that the white marks on the side of the both pick rollers be in the right- hand side of the scanner.

White mark

M3099EX/EH OEM Manual

4-35