Situation

Solution

The printer prints only part of a The connection has been broken

page or document.during transmission. If you move the portable device during transmission, the connection can be broken. IrDA-compliant devices are designed to recover from temporary connection interruptions. Re-establish the connection (depending on the device you are using, you can have anywhere from 3 to 20 seconds to re-establish the connection)

The print job has been properly If the connection is broken sent to the printer, but the printerbefore the entire print job has

will not print.been transmitted to the printer (printing has not yet started), the printer may not print any of the job. If the Data light is on, press the Job Cancel button to clear the printer’s memory. Then, position the device within the range of operation, and print the job again.

The IR status light turns off

The connection may have been

during transmission.

broken If the Data light is on,

 

press the Job Canel button to

 

clear the printer’s memory.

 

Then, position the device within

 

the range of operation, and print

 

the job again.

B-42 LaserJet 5/5M/5N Printer