HP Integrity Server rx4640 manual Removing and Replacing the DVD I/O Board

Removing and Replacing Components

Removing and Replacing the DVD I/O Board

Step 7. Using a torx #15 driver, remove the two torx screws holding the DVD I/O board cover plate to the chassis and remove the cover plate.

Figure 4-43 Removing and Replacing the DVD I/O Board

Cover

DVD I/O board

Step	8.	Unfasten the release clip attaching the DVD I/O board to the chassis. and remove the I/O board
		from the chassis.
Step	9.	Lift out the DVD I/O board and remove the midplane riser board connector cable and remove the
		DVD I/O board from the chassis.

Chapter 4 105