HP Integrity Server rx4640 manual Replacing a Processor

Removing and Replacing Components

Removing and Replacing a Processor

Step 8. Unlock the processor from the processor extender board by inserting the 2 mm hex end of the processor installation tool through the processor into the ZIF socket lock and turning it 180 degrees counterclockwise. Figure 4-15 shows the location of the ZIF socket lock.

Figure 4-15 Unlocking the Processor from the Processor Extender Board Processor ZIF Socket Lock

Step 9. Carefully remove the processor from the processor extender board, and place in an antistatic bag.

Replacing a Processor

To install a processor on the extender board, perform the following steps. If you have already removed the processor extender board from the server, proceed to step 6.

CAUTION Ensure that the cache size is identical for all processors. Failure to observe this caution will result in server failure.

Ensure that all processors are rated for use at the same speed. Failure to observe this caution will result in performance degradation.

Observe all ESD safety precautions before attempting this procedure. Failure to follow ESD safety precautions could result in damage to the server.

58 Chapter 4