HP Integrity Server rx4640 manual Powering On the Server Manually

Powering Off and Powering On the Server

Powering On the Server

Step 6. Start the operating system. See Appendix B, “Booting the Operating System,” on page 141, or your operating system documentation for more information.

Powering On the Server Manually

NOTE	If the power restore feature is set to Always On through the iLO MP PR command, the server
	may automatically power on to the full power state.

To manually power on the server, follow these steps:

Step	1.	Plug all power cables into the receptacles on the rear panel of the server.
Step	2.	Press the power button to start the server.
Step	3.	Start the operating system. See Appendix B, “Booting the Operating System,” on page 141, or your
		operating system documentation for more information.

36 Chapter 3