HP Integrity Server rx4640 manual Inserting PCI-X Card

Removing and Replacing Components

Removing and Replacing Hot-Plug PCI-X Cards

Figure 4-27 Inserting PCI-X Card

Online Deletion (OL-D)

To delete a PCI-X card from an occupied slot, follow these steps:

Step	1.	If rack mounted, slide the HP server out from the rack until it stops. See “Extending the Server
		from the Rack” on page 39.
Step	2.	Remove the top cover from the chassis. See “Removing the Top Cover” on page 43.
Step	3.	Press the attention button located on the OLX divider that controls the affected slot—the power
		LED starts to blink. Wait until the power LED goes from blinking to steady-off.
		NOTE	After pushing the attention button, you have 5 seconds to cancel the operation by
			pushing the attention button again.

Chapter 4 79