HP Integrity Server rx4640 manual Inserting Scsi I/O Card

Removing and Replacing Components

Removing and Replacing Core I/O Cards

Step 6. Install replacement SCSI I/O card. Figure 4-32 shows the correct way to install the SCSI I/O card.

CAUTION Always handle I/O cards by their edges. Failure to comply with this precaution may result in damage to the card.

Ensure that you fully seat the card into the slot or the card may be damaged when power is re-applied to the slot.

Figure 4-32 Inserting SCSI I/O Card

		Back of server
Step	7.	Close the blue PCI card latch for slot 1 by twisting it counter-clockwise.
Step	8.	Reconnect the internal and external SCSI cable(s) to the SCSI core I/O card.
Step	9.	Replace the top cover. See “Replacing the Top Cover” on page 44.

Step 10. Push the HP server back into the rack until it stops. “Inserting the Server into the Rack” on page 39.

Chapter 4 87