HP Integrity Server rx4640 manual Removing and Replacing the Midplane Riser Board

Removing and Replacing Components

Removing and Replacing the Midplane Riser Board

NOTE	At this point, all cables and connectors should be unplugged from the midplane riser
	board.

Step 13. Using a torx #15 driver, remove the five torx screws attaching the midplane riser board to the chassis.

Step 14. Grasp the top edge of the midplane riser board and lift straight up to release it from the keyway slots on the chassis. Then pull straight out and up to remove the midplane riser board from the chassis. Figure 4-39 shows how to remove the midplane riser board.

Figure 4-39	Removing and Replacing the Midplane Riser Board
	2	3	1-5
			Attaching screw
	1	5	locations

Midplane riser board

4

96 Chapter 4