HP Integrity Server rx4640 manual 22 I/O Baseboard Locking Lever

Removing and Replacing Components

Removing and Replacing the I/O Baseboard

CAUTION When unplugging the SCSI cables, note the labeling on the SCSI A and SCSI B channel cables. When plugging in these cables, you must match each cable with its appropriate socket on the SCSI HBA. If the cables are mismatched your server may not reboot. Both cables and sockets are clearly marked with the correct channel.

Step 6. Lift up on the locking lever attached to the side of the Power Supply cage to unplug the I/O baseboard from the socket on the midplane riser board. Figure 4-22 shows the locking lever.

Figure 4-22 I/O Baseboard Locking Lever

OPEN

CLOSE

Chapter 4 67