HP Integrity Server rx4640 manual Shutting Down HP OpenVMS

Booting the Operating System

Booting and Shutting Down HP OpenVMS

Press Ctrl+B to exit the system console and return to the iLO MP Main Menu. To exit the iLO MP, enter X at the Main Menu.

Shutting Down HP OpenVMS

This section describes how to shut down the HP OpenVMS operating system on entry-class HP Integrity servers.

Step	1. From the HP OpenVMS DCL prompt, issue the @SYS$SYSTEM:SHUTDOWN command to shut down
	the OpenVMS operating system.
Step	2. Log in to HP OpenVMS running on the server that you want to shut down.
	You should log in to the iLO MP for the server and use the Console menu to access the system
	console. Accessing the console through the iLO MP enables you to maintain console access to the
	server after HP OpenVMS has shut down.
Step	3. At the OpenVMS DCL prompt issue the @SYS$SYSTEM:SHUTDOWN command and specify the
	shutdown options in response to the prompts given.
	>@SYS$SYSTEM:SHUTDOWN
	SHUTDOWN -- Perform an Orderly System Shutdown
	on node RSNVMS
	How many minutes until final shutdown [0]:
	Reason for shutdown [Standalone]:
	Do you want to spin down the disk volumes [NO]?
	Do you want to invoke the site-specific shutdown procedure [YES]?
	Should an automatic system reboot be performed [NO]? yes
	When will the system be rebooted [shortly via automatic reboot]:
	Shutdown options (enter as a comma-separated list):

REBOOT_CHECK	Check existence		of basic system files
SAVE_FEEDBACK	Save AUTOGEN feedback information from this boot
DISABLE_AUTOSTART	Disable	autostart queues
POWER_OFF	Request	console	to power-off the system

Shutdown options [NONE]:

%SHUTDOWN-I-OPERATOR, this terminal is now an operator’s console

%%%%%%%%%%% OPCOM 12-JUL-2005 18:47:51.01 %%%%%%%%%%%

Operator status for operator _RSNVMS$OPA0:

CENTRAL, PRINTER, TAPES, DISKS, DEVICES, CARDS, NETWORK, CLUSTER, SECURITY,

...

NOTE HP OpenVMS I64 currently does not support the POWER_OFF shutdown option.

152 Appendix B