HP Integrity Server rx4640 manual Server Components

Introduction

Server Components

Server Components

The following components comprise the HP Integrity rx4640 server.

Processors

The following processors are available for the rx4640 server:

•1.6 GHz / 18 MB cache

•1.6 GHz / 24 MB cache

These processors are dual core processors. The processor configuration options are 1-processor/2-core (1p/2c), 2p/4c, 3p/6c, or 4p/8c.

Memory

•16 DIMM slots on standard memory extender board

•32 DIMM slots on optional memory extender board

•Minimum memory size of 1 GB (four 256 MB DIMMs in

•Maximum memory size of 128 GB (4 GB DIMMs on 32-slot memory extender board)

•256 MB, 512 MB, 1 GB, 2 GB, and 4 GB standard 184 pins 2.5V DDR 200, CL2, registered, ECC

•200 MHz memory bus frequency, 400 MTransfers/s data, 12.8 GB/s peak data bandwidth

•DIMMs loaded by quads enable interleaved mode and chip spare

PCI Riser

•Two dedicated PCI slots (LAN and SCSI)

•Four hot-plug PCI-X 66 MHz, 64-bit, 3.3V, 25W slots with shared busses and I/O. Slots 3 and 4 share a PCI-X bus and slots 5 and 6 share a PCI-X bus

•Two hot-plug PCI-X 133 MHz 64-bit 3.3V 25W slots

Internal Core I/O

•Dual channel SCSI U320 interface, two internal 68-pin connectors, two 68-pin external connectors

•The SCSI backplane is configured as either one or two channels

•One internal IDE connector for a slim-line optical device (CD and DVD)

•No floppy connector

External Core I/O

•Three external DB-9 ports (MP local, auxiliary, remote)

•Two external USB 2.0 ports

•Two SCSI Ultra320 68-pin connectors

22 Chapter 1