HP Integrity Server rx4640 manual Sysmode, Example C-16 Pdt Command, Example C-17

Utilities

EFI/POSSE Commands

Syntax

pdt (clear)

Parameters

<clear> clears the pdt

Operation

With no options specified, the command displays the PDT information for the server. The PDT is cleared and a reboot is required for memory reallocation and safe booting.

Example C-16	pdt Command
Shell> pdt
PDT Information for PD
Last Clear time for PD: PDT has not been cleared
Number of total entries in PD PDT:		100
Number of used entries in PD PDT:		0
Number of free entries in PD PDT:		50

Number of permanent correctable (SBE) entries in PD PDT: 0

Number of permanent uncorrectable (MBE) entries in PD PDT: 0

Address of first uncorrectable error in PD: 0x0000000000000000

Example C-17	pdt clear Command
Shell> pdt clear
Are you sure you want to clear		the PDT? [y/N] y
Shell>
Shell> pdt
PDT Information
	Last Clear time: 10/21/01		5:00p
Number of total entries		in PDT:	50
Number of used entries		in PDT:	0
Number of free entries		in PDT:	50
Number of single-bit entries		in PDT:	0
Number of multi-bit entries		in PDT:	0

Address of first multi-bit error: 0x0000000000000000

sysmode

Display or modify the system mode.

Syntax

sysmode <normal admin service>

Parameters

<normal>	sets system mode to normal
<admin>	sets system mode to admin
<service>	sets system mode to service

Appendix C 179