Utilities
EFI/POSSE Commands
Parameters
[test] Each test can be set or cleared: | |
booting_valid | Enable/disable system firmware response to BOOTING |
| bit. If OS Speedy Boot aware set to on. |
early_cpu | Enable/disable early CPU selftests. |
late_cpu | Enable/disable late CPU selftests. |
platform | Enable/disable system board hardware tests. |
chipset | Enable/disable CEC tests. |
io_hw | Enable/disable EFI driver Core I/O tests. |
mem_init | Enable/disable memory initialization. |
mem_test | Enable/disable full destructive memory tests. |
Example | boottest Command | |
Shell> boottest |
|
|
BOOTTEST Settings Default | Variable | |
Selftest | Setting |
|
booting_valid | On (OS speedy boot aware) | |
early_cpu | Run this | test |
late_cpu | Run this | test |
platform | Run this | test |
chipset | Run this | test |
io_hw | Run this | test |
mem_init | Run this | test |
mem_test | Run this | test |
Example | boottest early_cpu off Command | |
Shell> boottest early_cpu off |
| |
BOOTTEST Settings Default | Variable | |
Selftest | Setting |
|
booting_valid | On (OS speedy boot aware) | |
early_cpu | Skip this test | |
late_cpu | Run this | test |
platform | Run this | test |
chipset | Run this | test |
io_hw | Run this | test |
mem_init | Run this | test |
mem_test | Run this | test |
cpuconfig
Displays the config/deconfig state of processors in the server and allows the user to configure or reconfigure processors.
Syntax
cpuconfig <cpu> <onoff>
Parameters
<cpu> | specify a processor |
<onoff> | state to set the processor to |
Appendix C | 169 |