HP Integrity Server rx4640 manual Locking the Processor to the Processor Extender Board

Removing and Replacing Components

Removing and Replacing a Processor

CAUTION When rotating the locking cam, hold the palm of your hand on top of the assembly and exert light pressure. This ensures that the assembly stays flush and level to the socket while it is being tightened.

Figure 4-18 Locking the Processor to the Processor Extender Board

Processor ZIF Socket Lock

Step 10. Plug in the processor cable to its socket on the extender board.

Step 11. Place the sequencer frame over the processor.

Step 12. Using the ACX-15 torx screwdriver, tighten the six shoulder screws until they just bottom out. Follow the tightening sequence shown in Figure 4-19.

Chapter 4 61