HP KAYAK XU800 manual Wg dzc m, Zzz, All models are preloaded with Windows NT 4.0 SP5, Dz d, Dzz

6 at• Wtt

HP Kayak XU800 PC Workstation Overview

Otp			Mtr
Wg dzc m	Hardware monitoring utility that monitors system components via the I2C bus
.zzz /	and a LCD status panel.
fz	All models are preloaded with Windows NT® 4.0 SP5.
dz d	Models include either:
	• Four RIMM sockets supporting RDRAM ECC memory modules installed in
dzz
	. Any unused RIMM sockets must contain a continuity module.
z
	Models are supplied with either 128 MB or 256 MB RDRAM ECC main
H
	memory installed in		.
: VP .B : dP/
	Memory upgrades are available in			of: 64 MB, 128 MB, 256 MB or
	512 MB RDRAM ECC modules.
	• Four DIMM sockets supporting SDRAM 100 MHz ECC memory modules
	installed in	. Models are supplied with 128 MB of SDRAM unbuffered
	ECC main memory.
	Memory upgrades are available in			of: 64 MB, 128 MB, 256 MB or
	512 MB unbuffered 100 MHz ECC SDRAM modules.
dz	Seven shelves supporting:
	• Two front-access, third-height 3½-inch (one for the floppy disk drive and
	one free) (height 1”);
	• Three front-access, half-height, 5¼-inch drives (height 1.0”);
	Possibility of installing a 3½-inch hard disk drive in one of the
	5¼-inch shelves.
	• Two internal 3½-inch hard disk drives (height 1.0”).
kRkX R	Ultra 160 SCSI controller:
	Adaptec® AIC-7892 Ultra 160 16-bit integrated SCSI controller (160 MB/s).
	The internal SCSI connectors allow for up to five internal devices to be
	connected. Additional devices can be added outside the PC Workstation by
	connecting directly to the rear panel SCSI connector. The external connector
	allows up to ten external devices to be connected. This gives a maximum of 15
	(internal + external) devices that can be connected.
XST R	All models include an integrated Ultra ATA-66 controller that supports up to
	four IDE devices.

10