HP KAYAK XU800 85h, Bypassing Winbios Setup, 86h, 87h, 88h, Programming after Winbios Setup, 89h

< btUt

Order in Which POST Tests Are Performed

Lwtrz	ZYab ]xt Mtrx-Lxts.
L	-J Lwtrz Z x WYb p qt.
85h	Memory size check is done. Displaying a soft error and checking for a password or
	bypassing WINBIOS Setup.
86h	Password was checked. Performing any required programming before WINVIOS Setup.
87h	Programming before WINBIOS Setup has completed. Uncompressing the WINBIOS Setup
	code and executing the AMIBIOS Setup or WINBIOS Setup utility.
88h	Returned from WINBIOS Setup and cleared the screen. Performing any necessary
	programming after WINBIOS Setup.
89h	Programming after WINBIOS Setup has completed. Display the power on screen message.
8Bh	First screen message has been displayed. The <WAIT...> message is displayed.
	Performing PS/2 mouse check and extended BIOS data area allocation check.
8Ch	Programming the WINBIOS Setup options.
8Dh	WINBIOS Setup options are programmed. Resetting the hard disk drive controller.
8Fh	Hard disk drive controller has been reset. Configuring the floppy disk drive controller.
91h	Floppy disk drive controller has been configured. Configuring the hard disk drive controller.
95h	Initializing the bus option ROMs from C800.
96h	Initializing before passing control to the adaptor ROM at C800.
97h	Initialization before the C800 adaptor ROM gains control has completed. The adaptor ROM
	is then checked.
98h	Adaptor ROM has control and has now returned control to BIOS POST. Performing any
	required processing after the option ROM returned control.
99h	Any initialization required after the option ROM test has completed. Configuring the timer
	data area and printer bas address.
9Ah	Set the timer and printer bas address. Setting the RS-232 bas address.
9Bh	Returned after setting the RS-232 bas address. Performing any required initialization
	before the co-processor test.
9Ch	Required initialization before the co-processor test is over. initializing the co-processor.
9Dh	Co-processor initialized. Performing any required initialization after the co-processor test.
9Eh	Initialization after the co-processor test is complete. Checking the extended keyboard IDn
	and Num Lock key. Issuing the keyboard ID command.

121