HP KAYAK XU800 System Overview, HP Kayak XU800 PC Workstation Overview

1

System Overview

This manual describes the HP Kayak XU800 PC Workstation and provides detailed system specifications.

This chapter introduces the external features, and lists the specifications and characteristic data of the system. It also provides a summary of the documentation available.

HP Kayak XU800 PC Workstation Overview

The HP Kayak XU800 PC Workstation is based on the Extended ATX (E-ATX) form factor.

The following table provides an overview of the system.

Feature	Description
System Board	E-ATX with a dimension of 12.8-inch x 11.4-inch.
Processor	All models have support for up to two Intel Pentium® III processors.
	For Processor 1, a VRM (Voltage Regulator Module) is integrated on the
	system board, while there is a VRM socket for a second processor.
Cache Memory	• Level-One: 16 KB code, 16 KB data.
(integrated in processor	• Level-Two: i256 KB.
package)
Internal CPU Clock Rate	533 MHz, 600 MHz, 667 MHz, 733 MHz, 800 MHz and higher.
External Processor Bus	133 MHz Front Side Bus.
	Intel® Chipset (I840) including, Input/Output Controller Hub (ICH), PCI 64-bit
Chipset	Hub (P64H), FirmWare Hub (FWH) and Memory Repeater Hub (MRH-S) for
	SDRAM support.
Super I/O Chip	NS 87364.
BIOS (Basic Input/Output	Based on the core of AMIBIOS, including:
System)	• 4 M/bits of flash memory.
	• Support for PCI 2.2 Specification.
	• Support for RDRAM or SDRAM memory modules.
Firmware - BIOS	Flash EEprom: Intel’s Firmware hub concept.

9