Replace supplies and parts

Carefully follow the guidelines in this section when replacing device supplies.

Supply replacement guidelines

To facilitate the replacement of supplies, keep the following guidelines in mind when setting up the device.

●Sufficient space is required above and in the front of the device for removing supplies.

●The device should be located on a flat, sturdy surface.

For instructions on installing supplies, see the installation guides provided with each supply item or see more information at www.hp.com/support/LJM3027mfp or www.hp.com/support/LJM3035mfp.

NOTE Hewlett-Packard recommends the use of HP products in this device. Use of non- HP products may cause problems requiring service that is not covered by the HP warranty or service agreements.

Change the print cartridge

When a print cartridge approaches the end of useful life, a message appears on the control panel recommending that you order a replacement. The device can continue to print using the current print cartridge until a message appears instructing you to replace the cartridge.

1.Open the front door.

2.Remove the used print cartridge from the device.

ENWW

Replace supplies and parts 137