●Do not use any media that produces hazardous emissions, or that melts, offsets, or discolors when exposed to the temperature of the fuser.

●Do not use paper that is embossed or coated, or any media that is not designed to withstand the fusing temperature of the device. Do not use letterhead paper or preprinted forms that are made with dyes or inks that cannot withstand the heat of the fuser.

To order HP LaserJet printing supplies, see Order parts, accessories, and supplies.

General media specifications

For complete paper specifications for all HP LaserJet devices, see the HP LaserJet Printer Family Print Media Guide (available at www.hp.com/support/ljpaperguide) .

Category

Specifications

 

 

Acid content

5.5 pH to 8.0 pH

 

 

Caliper

0.094 to 0.18 mm (3.0 to 7.0 mils)

 

 

Curl in ream

Flat within 5 mm (0.02 in)

 

 

Cut edge conditions

Cut with sharp blades with no visible fray.

 

 

Fusing compatibility

Must not scorch, melt, offset, or release hazardous emissions when heated to 200°

 

C (392°F) for 0.1 second.

 

 

Grain

Long grain

 

 

Moisture content

4% to 6% by weight

 

 

Smoothness

100 to 250 Sheffield

 

 

ENWW

General guidelines for media 57