Table 2-14Device Behavior menu (continued)

Menu item

Sub-menu item

Sub-menu item

Values

Description

 

 

 

 

 

General Copy

Scan Ahead

 

Enabled (default)

Use this feature to turn on no-wait scanning.

Behavior

 

 

Disabled

With Scan Ahead enabled, the pages in the

 

 

 

original document are scanned to disk and

 

 

 

 

held until the device becomes available.

 

 

 

 

 

 

Auto Print Interrupt

 

Enabled

When this feature is enabled, copy jobs can

 

 

 

Disabled

interrupt print jobs that are set to print multiple

 

 

 

copies.

 

 

 

 

The copy job is inserted into the print queue

 

 

 

 

at the end of one copy of the print job. After

 

 

 

 

the copy job is complete, the device

 

 

 

 

continues printing the remaining copies of the

 

 

 

 

print job.

 

 

 

 

 

 

Copy Interrupt

 

Enabled

When this feature is enabled, a copy job that

 

 

 

Disabled

is currently printing can be interrupted when

 

 

 

a new copy job is started. You are prompted

 

 

 

 

to confirm that you want to interrupt the

 

 

 

 

current job.

 

 

 

 

 

General Print

Default Paper Size

 

Select from the list of

Use this feature to configure the default paper

Behavior

 

 

paper sizes.

size used for print jobs.

 

 

 

 

 

 

Override A4/Letter

 

No

Use this feature to print on letter-size paper

 

 

 

Yes (default)

when an A4 job is sent but no A4-size paper

 

 

 

is loaded in the device (or to print on A4 paper

 

 

 

 

when a letter-size job is sent but no letter-size

 

 

 

 

paper is loaded). This option will also override

 

 

 

 

A3 with ledger-size paper and ledger with A3-

 

 

 

 

size paper.

 

 

 

 

 

 

Manual Feed

 

Enabled

When this feature is enabled, the user can

 

 

 

Disabled (default)

select manual feed from the control panel as

 

 

 

the paper source for a job.

 

 

 

 

 

 

Courier Font

 

Regular (default)

Use this feature to select which version of the

 

 

 

Dark

Courier font you want to use.

 

 

 

 

 

 

 

 

 

 

Wide A4

 

Enabled

Use this feature to change the printable area

 

 

 

Disabled (default)

of A4-size paper. If you enable this option,

 

 

 

eighty 10-pitch characters can be printed on

 

 

 

 

a single line of A4 paper.

 

 

 

 

 

 

Print PS Errors

 

Enabled

Use this feature to select whether a

 

 

 

Disabled (default)

PostScript (PS) error page is printed when

 

 

 

the device encounters a PS error.

 

 

 

 

 

 

Print PDF Errors

 

Enabled

Use this feature to select whether a PDF error

 

 

 

Disabled (default)

page is printed when the device encounters

 

 

 

a PDF error.

 

 

 

 

 

 

Personality

 

Auto (default)

Select the printer language that the device

 

 

 

PCL

should use.

 

 

 

Normally you should not change the

 

 

 

PDF

 

 

 

language. If you change the setting to a

 

 

 

PS

specific language, the device does not

 

 

 

automatically switch from one language to

 

 

 

 

another unless specific software commands

 

 

 

 

are sent to the device.

 

 

 

 

 

ENWW

Use the Administration menu 41