Table
Control panel message | Description | Recommended action |
|
|
|
|
| |
|
| |
|
|
|
56.XX ERROR To continue turn off then on | A temporary printing error has occurred. | Turn the device off, and then turn the device |
|
| on. |
|
| If this message persists, contact an HP- |
|
| authorized service or support provider. (See |
|
| the HP support flyer, or go to www.hp.com/ |
|
| |
|
| |
|
|
|
57.X ERROR To continue turn off then on | A temporary printing error has occurred. | Turn the device off, and then turn the device |
|
| on. |
|
| If this message persists, contact an HP- |
|
| authorized service or support provider. (See |
|
| the HP support flyer, or go to www.hp.com/ |
|
| |
|
| |
|
|
|
58.XX ERROR To continue turn off then on | A temporary printing error has occurred. | Turn the device off, and then turn the device |
|
| on. |
|
| If this message persists, contact an HP- |
|
| authorized service or support provider. (See |
|
| the HP support flyer, or go to www.hp.com/ |
|
| |
|
| |
|
|
|
59.XY ERROR To continue turn off then on | A temporary printing error has occurred. | Turn the device off, and then turn the device |
|
| on. |
|
| If this message persists, contact an HP- |
|
| authorized service or support provider. (See |
|
| the HP support flyer, or go to www.hp.com/ |
|
| |
|
| |
|
|
|
60.XX ERROR To continue turn off then on | The tray specified by X is not lifting correctly. | Follow the instructions in the onscreen dialog |
|
| box. |
|
|
|
62 NO SYSTEM To continue turn off then | A problem exists with the device firmware. | Turn the device off, and then turn the device |
on |
| on. |
|
| If this message persists, contact an HP- |
|
| authorized service or support provider. (See |
|
| the HP support flyer, or go to www.hp.com/ |
|
| |
|
| |
|
|
|
64 ERROR To continue turn off then on | A scan buffer error occurred. | Turn the device off, and then turn the device |
|
| on. |
|
| If this message persists, contact an HP- |
|
| authorized service or support provider. (See |
|
| the HP support flyer, or go to www.hp.com/ |
|
| |
|
| |
|
|
|
68.X Permanent storage full | The device NVRAM is full. Some settings | Touch OK to clear the message. If the |
| saved in the NVRAM might have been reset | message is not cleared, turn the device off, |
| to the factory defaults. Printing can continue, | and then turn the device on. |
|
|
|
ENWW |