Front I/O Assembly

Description

Spare part number

 

 

Front I/O assembly

646827-001

 

 

1.Prepare the computer for disassembly (Preparation for Disassembly on page 56).

2.Remove the computer access panel (Computer Access Panel on page 57).

3.Remove the front bezel (Front Bezel on page 58).

4.Remove the front fan (Front Fan Assembly on page 82).

5.Disconnect the three front I/O cables (yellow, green, and blue) from the system board connectors (FRONT USB, FRONT USB2, and FRONT AUD).

6.Remove the Torx T15 screw that secures the assembly to the chassis. Figure 6-28Removing the front I/O assembly screw

7.Rotate the left side of the assembly to the right . Figure 6-29Removing the front I/O assembly

8.Pull the assembly away from the computer while threading the wires through the hole in the front of the chassis.

To reinstall the assembly, reverse the removal procedure.

84

Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis