Power Switch/LED Assembly
Description | Spare part number |
|
|
Power switch/LED assembly | |
|
|
1.Prepare the computer for disassembly (Preparation for Disassembly on page 56).
2.Remove the access panel (Computer Access Panel on page 57).
3.Remove the front bezel (Front Bezel on page 58).
4.Remove the front fan (Front Fan Assembly on page 82).
5.Disconnect the cable from the system board connector labeled PB/LED.
6.With the computer on its side, press on the tabs on the bottom of the assembly (1) to disengage the assembly from the chassis, and then rotate the bottom of the assembly upward (2) to remove it from the chassis.
Figure 6-30 Removing the power switch/LED
7.Pull the assembly away from the chassis while threading the cable through the hole in front of the chassis.
Power Switch/LED Assembly | 85 |
