Setting Up or Removing Channels as RAS Ports

Setting Up or Removing Channels as RAS Ports

If you need to add ISDN or digital modem channels as RAS- capable devices after software installation, use the Remote Access Setup dialog box and the Add RAS Device dialog box to set up the channels as RAS ports. You can also use the Remote Access Setup dialog box to remove channels from the RAS device list so that the channels are no longer designated as RAS devices.

Setting Up RAS Port Designations

To set up ISDN or digital modem channels as RAS ports, do the following:

1.Validate the RAS support properties for the appropriate driver type, as follows:

a.From the Start menu, select Settings, and then Control Panel. Then double-click the Network icon, and select the Adapters tab.

b.Select Interphase 553x ISDN RAS Support to set up ISDN RAS ports, or select Interphase 5536 Digital Modem RAS support to set up digital modem RAS ports.

c.Click the Properties button.

d.When the RAS Support General dialog box appears, click OK to confirm the general RAS support properties for the RAS ports being added.

2.When the Network Adapters dialog box reappears, select the Services tab to display the Services dialog box.

90

Interphase Corporation