![](/images/backgrounds/146446/146446-24471x1.png)
Chapter 4: Installing the Software
For the Digital Modem RAS Support driver, the driver name in the title bar is 5536 DM RAS Support. For the ISDN RAS Support driver, the driver name is 553x ISDN RAS Support. The contents of the dialog box are the same for both drivers.
The RAS support setup is done automatically. The RAS Support General dialog box enables you verify RAS support properties for the driver you are configuring.
NOTE
If you need to set up additional card or port properties before continuing, click the WAN Setup button to access the WAN Adapters Setup dialog box. Then repeat the appropriate steps in Setting Up Card and Port Properties on page 44.
RAS Support dialog boxes and setup procedures are described in detail in Setting Up RAS Support Properties on page 95.
To complete the RAS Support setup:
1.If needed, change the Idle Timeout value from 0, which disables the timeout function, to the number of seconds of inactivity to allow before ending a connection.
2.If needed, check the SecurID support box to enable additional filtering on SecurID authentication information and change the Separator character if necessary.
3.Click OK to confirm the displayed configuration.
One of the following messages appears, depending on whether RAS is installed on your system:
5536 PRI RAS Communications Controller Users Guide | 51 |