Setting Up Call Properties

Field

Description

 

 

Local

Enter the local subscriber number(s) for a port to route an

Subscriber

incoming call to that port when several ports are able to

Number

accept the call. The local subscriber number(s) must match

 

the subscription number(s) your local Telco has assigned to

 

your line.

 

This field is available only at the port level. If multiple types

 

of ports accept the same channel type, it is required for each

 

affected port. Otherwise, it is optional. Ports of the same

 

type, such as COM ports, can use the same local subscriber

 

number(s).

 

NOTE: On a single-PRI port card, this field is available for

 

the ISDN RAS port only if the ISDN physical line supports

 

Multiple Subscriber Numbers (MSN).

 

 

Modem

Use the Modem Initialization Strings field to enter

Initialization

initialization strings for incoming and outgoing calls, if

Strings

needed.

(Hayes

This field is available only for the DM RAS modem port and

Commands)

for DM serial driver COM ports. It is optional.

 

 

You can select multiple ports of the same type in the tree view (that is, multiple ISDN or COM ports) and configure them together.

The way incoming calls are routed depends on the Channel type values selected and the Local subscriber numbers entered.

106

Interphase Corporation