![](/images/backgrounds/146446/146446-24457x1.png)
Installing the
Software 4
Overview
This chapter describes the procedures for installing and setting up your 5536 software on Microsoft Windows NT 4.0 workstations. Use this process to install the Base driver (along with the Serial driver and utilities), the ISDN RAS support driver, the Digital Modem RAS support driver, the SecurID support driver and service, and the Acotec Virtual Motion Remote Access Manager Suite. This chapter also explains how to remove 5536 software, if required.
To install and set up the software, follow these basic steps:
1.Verify that your system meets minimum requirements.
2.Install the Base driver, with accompanying software, and the appropriate RAS support driver(s).
3.Set up WAN card and port properties.
4.Set up RAS support properties for the installed RAS driver(s).
5.Set up ISDN B and Digital Modem channels as RAS ports.
6.If you want to use Acotec Virtual Motion RAS management services on the computer, install Remote Access Manager Suite components.
7.Complete the installation to make driver settings take effect.
5536 PRI RAS Communications Controller Users Guide | 37 |