![](/images/backgrounds/146446/146446-24496x1.png)
Hardware Management
The Cards section of the WAN Adapters Setup dialog box displays all the 5536 WAN boards installed in the machine, their status, and their available communication ports. The Firmware section displays information about the board selected in the Cards section. You can use the buttons in the Cards section to add, remove, or configure WAN boards.
NOTE
If you change any firmware, card, or port properties, you must apply changes, reload the firmware, save properties, and restart the system, as described in Saving WAN Setup Properties on page 87.
The board status is represented by its icon color:
LED Color | Meaning |
|
|
Gray | The board is detected but is not working. |
|
|
Yellow | The hardware configuration has been changed but not |
| applied. |
|
|
Green | The board is running. |
|
|
Use the following buttons to set up board hardware:
Click... | To do this... |
|
|
Add | Add a new board to the operating system. This option is |
| enabled if one or more Interphase WAN cards can be |
| installed. |
|
|
Remove | Remove an 5536 board. This option removes the board and |
| its drivers from the operating system. |
76 | Interphase Corporation |