![](/images/backgrounds/146446/146446-24472x1.png)
Setting Up RAS Support Properties
–If RAS is not installed, a message informs you that RAS support setup is complete, and states that Remote Access Services (RAS) setup must now be installed.
Click OK. Then continue to step 4.
–If RAS is installed, a message informs you that RAS support setup is complete, and states that Remote Access Services (RAS) setup must now be invoked.
Click OK. Then skip to Setting Up Channels as RAS Ports on page 53.
4.When the following message informs you that Setup needs to copy Windows NT files, insert the Windows NT CD:
Figure5.If you want Setup to find the Windows NT files in a location other than the default, enter the complete path.
6.Click Continue to complete the RAS installation.
To continue the software installation, set up digital modem or ISDN channels as RAS ports, as described in the next section, Setting Up Channels as RAS Ports.
52 | Interphase Corporation |