Chapter 4: Installing the Software

For North America and Japan, select Law (Mu Law).

3.Click OK.

If you have not yet configured the board’s ISDN port properties, do so now, as described in Configuring ISDN Port Properties on page 46. Otherwise, continue to the next topic.

Completing the WAN Setup

When WAN card and port properties are configured as needed, do the following to complete the WAN setup:

1.Click OK in the WAN Adapters Setup dialog box.

The setup software finds firmware for the board. It updates the registry and dynamically installs the drivers.

2.When the following message informs you that the driver is running, click OK.

Figure 4-10. Successful Setup Message

Next, set up RAS support properties for the driver.

5536 PRI RAS Communications Controller Users Guide

49