Chapter 4: Installing the Software

Removing the Drivers

If you no longer use the communications controller, do the following to remove the Base driver (including the Serial Driver and utilities) and the RAS support drivers (Digital Modem and/or ISDN RAS support):

NOTE

As long as one of the RAS Support drivers is still installed, the Base driver remains installed. The Base driver is automatically removed when you remove the second (and last) RAS Support driver.

1.Be sure you are logged on with administrator rights to the Windows NT 4.0 system.

2.From the Start menu, select Settings, and then Control Panel. Then double-click the Network icon, and select the Adapters tab to display the Adapters dialog box:

5536 PRI RAS Communications Controller Users Guide

65