![](/images/backgrounds/146446/146446-24494x1.png)
Firmware Management
The Firmware section of the WAN Adapters Setup dialog box displays firmware information for the WAN card selected in the Cards section. It displays the protocols you can use with the card, and their status. You can view the firmware status, reload the firmware, or change the firmware.
The firmware status is represented by a general LED color for the firmware and individual LEDs for each protocol, as follows:
LED Color | General Firmware | Individual Protocol LEDs |
|
|
|
Red | No firmware is found on the | N/A |
| disk for the current card. |
|
|
|
|
Gray | Firmware is found but is not | The protocol is inactive. |
| loaded into the card. |
|
|
|
|
Yellow | Firmware is running on the | Changes to the firmware layer |
| card but differs from | have been applied, but have |
| firmware found on the disk | not been loaded and saved to |
| for this card. | the disk. |
|
|
|
Green | The firmware is running. | The protocol is active. |
|
|
|
74 | Interphase Corporation |